Filter
Top Products
Automatic transmission
125
C Comfort For comfort driving
S Sport For standard driving
Program mode selector switch on C 63 AMG
C Comfort For standard driving
S Sport For sporty driving
M Manual For manual gearshifting
(Y page 127)
The current program mode appears in the
multifunction display.
1
Program mode indicator
You should only change the program mode
when the automatic transmission is in park
position P.
i
The last selected program mode (C or S)
is switched on when the engine is
restarted.
X
Press the program mode selector switch
repeatedly until the letter of the desired
program mode appears in the multifunction
display.
Selecting program mode C means:
R
The vehicle starts out more gentle, both
forward and reverse, except when driving
off with full throttle.
R
Traction and driving stability are improved
on icy roads.
R
Upshifts occur earlier even when you give
more gas. The engine then operates at
lower revolutions and the wheels are less
likely to spin.
Selecting program mode S means that
upshifts occur later.
One-touch gearshifting
With the automatic transmission in drive
position D and driving in automatic program
mode C or S, you can limit or extend the gear
range using the gear selector lever or the
steering wheel gearshift contol.
C 63 AMG: For information on using the gear
selector lever or the steering wheel gearshift
control in manual program mode M, see
“Manual shift program” (Y page 127).
Controls in detail
Z