Filter
Top Products
Audio system
169
Information displayed in the status line
(example)
The following information is displayed in the
status line:
R
Time (04:38)
R
Station name (WNYC)
Mobile phone readiness is indicated by
additional information being shown:
R
Mobile phone network signal strength
I
R
Receiver symbol 4 ö
Calling up wave bands
You can choose from among the FM, AM and
WB wave bands and then request the Sat
mode (Y page 172). Pressing again button
b will switch back to FM radio mode.
Wave band Frequency
WB (Weather Band) Weather channels
FM 87.7......107.9 MHz
AM 530.......1710 KHz
X
Press button b on audio control unit
repeatedly until desired wave band has
been selected.
The FM, AM, and WB wave bands and the
satellite radio mode are called up one after
another.
The wave band currently selected appears
in the status line of the audio display. The
last selected station in the selected wave
band is heard.
Selecting a station/channel
You have the following selection options:
R
The station search function
R
The channel list (Weather Band/satellite
radio)
R
Station memory (except Weather Band)
R
The manual frequency entry (except
Weather Band/satellite radio)
For using satellite radio see (Y page 172).
The station search proceeds in the following
frequency increments:
R
200 kHz in FM range
R
10 kHz in AM range
Tuning to a station/channel via station/
channel search function
i
The search function searches for the next
receivable station in the FM or AM wave
band. In Weather Band (WB) the search
function switches to the next channel in the
channel list. For tuning to a station/
channel you can also use the buttons on
the multifunction steering wheel, see
“Audio menu” (Y page 140).
X
Press button b on audio control unit
repeatedly until the FM/AM/WB wave
band is selected.
X
Slide omp or rotate ymz when the main
area in the basic menu is active.
Depending on the direction in which the
controller is being slid or rotated, the
system searches upward or downward and
stops at the next station/channel.
or
X
Press button G or H on audio control
unit.
Depending on the pressed button, the
system searches upward or downward and
stops at the next station/channel.
Controls in detail
Z