Filter
Top Products
Lighting
103
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.
Turn signals
1
Turn signals, right
2
Turn signals, left
X
Press the combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes.
The combination switch resets automatically
after major steering wheel movements.
i
To signal minor directional changes such
as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.
Hazard warning flasher
The hazard warning flasher can be switched
on at all times, even with the SmartKey
removed from the starter switch.
The hazard warning flasher comes on
automatically when an air bag deploys.
1
Hazard warning flasher switch
X
Switching on: Press hazard warning
flasher switch 1.
All turn signal lamps are flashing.
i
With the hazard warning flasher activated
and the combination switch set for either
left or right turn, only the respective left or
right turn signals will operate when the
ignition is switched on.
X
Switching off: Press hazard warning
flasher switch 1 again.
i
If the hazard warning flasher was
activated automatically, press hazard
warning flasher switch 1 twice to switch
off the hazard warning flasher. The hazard
warning flasher is switched off
automatically at vehicle speeds of
approximately 6 mph (10 km/h) or higher.
Headlamp cleaning system
The headlamps will be cleaned with a high-
pressure water jet automatically when the
engine is running and you have
R
switched on the headlamps
and
R
the windshield wipers have wiped the
windshield with washer fluid for the first
time
The headlamps are cleaned every tenth time
the windshield is washed with washer fluid.
When you switch off the headlamps or the
ignition, the automatic function is reset and
Controls in detail
Z