Filter
Top Products
Control system
142
1
Current scene
X
Selecting previous or next scene: Press
button % or $ briefly.
X
Selecting a scene from the scene list
(quick search): Press and hold button
% or $.
TEL menu
The functions available in the system and the
messages in the multifunction display depend
on which optional equipment is installed in
your vehicle.
G
Warning!
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking
a telephone call. If you choose to use the
telephone while driving, please use the
hands-free device and only use the
telephone when weather, road and traffic
conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a
vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e.
without being connected to an external
antenna) from inside the vehicle while the
engine is running. Doing so could lead to a
malfunction of the vehicle’s electronic
system, possibly resulting in an accident
and/or personal injury.
You can connect your telephone to the audio
system (Y page 189) or to the COMAND
system via Bluetooth
®
, see separate
COMAND system operating instructions.
X
Switch on the audio system (Y page 152)
or the COMAND system, see separate
COMAND system operating instructions.
X
Press button ( or & to select the
Tel menu.
One of the following messages will appear
in the multifunction display:
R
No Service: No network is available.
R
Ready for Bluetooth
Telephony...: The telephone has not
been connected to the audio system or
COMAND system via Bluetooth
®
yet.
X
Connect the telephone to the audio
system or COMAND system via
Bluetooth
®
.
R
Phone READY or name of the network
provider (if available): The telephone has
found a network and is ready for use. You
can operate it using the control system.
Controls in detail