Filter
Top Products
483
Controls in detail
Driving systems
Adjusting instrument cluster
illumination
1 Knob
̈ Make sure the Night View Assist is
switched on.
̈ Brightening illumination: Turn
knob 1 clockwise.
̈ Dimming illumination: Turn knob 1
counterclockwise.
Dirty or fogged-up windshield
If the windshield in front of the camera is
fogged up on the inside or outside or if it is
dirty, the Night View Assist image is
diminished.
Removing condensation
̈ Check settings of automatic climate
control and change them, if necessary
(
୴ page 491).
̈ Swing the camera cover downward
(
୴ page 602).
Cleaning inside of windshield
̈ Clean inside of windshield in front of
camera with a soft, non-scratching
cloth (
୴ page 602).
i
If you change the brightness of the instru-
ment cluster while Night View Assist is switched
on, only the brightness of the multifunction dis-
play is changed.
Warning! G
Please do not forget that your primary re-
sponsibility is to drive the vehicle. A driver’s
attention to the road must always be
his/her primary focus when driving. For
your safety and the safety of others, stop be-
fore trying to remove window fogging or
cleaning the window in front of the
Night View Assist camera.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.