Filter
Top Products
212
Control systems
COMAND navigation system (entering a destination)
Entering a house number
How the house number is entered depends
on whether you have already entered just
the street or both the street and the city
(
୴ page 213).
With only the street entered previously
When COMAND can clearly allocate the
street to a city, the house number appears
without input characters. Select a house
number from the list (
୴ page 215).
When COMAND cannot clearly allocate the
street to a city, a house number screen ap-
pears. You can now enter a house number.
1 Numbers entered by the user
2 Input characters
3 Currently selected number
̈ Selecting numbers: Slide omp or
rotate ymz.
or
̈ Entering a number with the telephone
keypad using the R - 9 buttons
(
୴ page 86).
̈ Confirming number selection:
Press n.
̈ Deleting individual numbers:
Select ) in the bottom line and
press n.
̈ Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
̈ Canceling an entry: Select “Back” in
the bottom line and press n.
or
̈ Press back button L in the center
console (
୴ page 84).
̈ Confirming entry: Select ? in the
second line from the bottom and
press n.
If COMAND cannot clearly attribute the
house number to a city, the city input
menu appears.
̈ Entering city: Proceed as de-
scribed in the “Entering a city” sec-
tion (
୴ page 204).
After the city has been entered, the
address input menu appears again.
If COMAND can clearly attribute the
house number to a city, the address in-
put menu also appears.
i
The house number can only be entered after
the street has been entered.
You can only enter those house numbers which
are saved on the digital map. The digital map
does not contain all house numbers for all
streets.