Filter
Top Products
159
Control systems
COMAND telephone*
1 Data field
2 Input mark (cursor)
3 Input characters
̈ Changing data field: Slide qmr re-
peatedly until desired data field is high-
lighted.
or
̈ Select [ or ] repeatedly until de-
sired data field is highlighted.
̈ Entering data into a field: Select all
characters one by one from the input
characters line 3.
̈ Toggling upper and lower case for
the input characters: Select & or
(.
̈ Changing language for the input
characters: Select !.
̈ Select desired language.
̈ Changing character set for the input
characters: Select #.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
̈ Displaying special characters as in-
put characters: Select ! Ǟ “Sym-
bols”.
̈ Returning input characters to nor-
mal characters: Select ! Ǟ the
desired language.
̈ Moving cursor in the data field:
Select Y or Z.
̈ Deleting individual characters:
Select ) and briefly press n.
The character to the left of the cursor is
deleted.
̈ Deleting an entire entry: Select )
and press and hold n until the entry is
deleted.
̈ Saving an entry: Select ?.
̈ Canceling an entry: Select “Back”.
If one of the data fields contains data, a
prompt will appear asking whether you
want to save the entry.
̈ Select “Yes” or “No”.
The entry will either be saved or
not, depending on your selection.