Filter
Top Products
376
Controls in detail
Seats
Seat ventilation*
The buttons for seat ventilation are located
on the respective door. The blue indicator
lamps on the button come on show the
ventilation level selected.
1 Seat ventilation button
̈ Switch on the ignition (୴ page 365).
̈ Switching on: Press button 1 repeat-
edly until the desired ventilation level is
set.
One or more blue indicator lamps on
the button show the selected ventila-
tion level.
̈ Switching off: Press button 1 repeat-
edly until all indicator lamps go out.
Head restraints
Level
3 Three indicator lamps on
(highest level)
2 Two indicator lamps on
1 One indicator lamp on
(lowest level)
off No indicator lamp on
i
The seat ventilation for the driver’s seat can
be activated using summer opening feature
(
୴ page 404).
i
If one or more of the lamps on the seat ven-
tilation button are flashing, there is insufficient
voltage available since too many electrical con-
sumers are turned on. The seat ventilation
switches off automatically.
The seat ventilation will switch back on again au-
tomatically as soon as sufficient voltage is avail-
able.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.