160
Customize Menu, with "GPS Data" and "Navigation" categories expanded.
Selecting the category name and pressing ENT will show the category's
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents. Just
select the category name and press
ENT.
3. Expand any categories that might contain data you want to display.
Press ↓ ↑ to select a different data option.
4. With the new option highlighted, press
ENT to switch the contents of
the box to the new data type and press
EXIT. You can now select an-
other box to change. When you are finished with the settings, press
EXIT again to end the Customize command, and the box name stops
flashing.
NOTE:
A Page display can show a limited number of data boxes. You can
not add or remove data boxes.
GPS Simulator
The GPS simulator lets you use the unit as if you were outdoors navigat-
ing somewhere. It's a great way to practice using your unit. You can set
the starting location by entering latitude/longitude (Starting Position) or
from a stored waypoint, map place or POI. You can steer your position
and change speed on the map by using the arrow keys (
STEER WITH ARROWS
command) or by setting the track and speed in the dialog boxes provided
on the simulator menu screen.
To turn on the GPS Simulator:
1. Press
MENU|MENU, highlight SYSTEM SETUP and press ENT.
2. Select
SIMULATORS and press ENT.