Filter
Top Products
108
Timers: controls the up timer, down timer and alarm clock settings.
Browse MMC Files: this allows you to view the installed MMC card
and the files it contains.
Pages
The unit has four Page displays that represent the five major operating
modes. They are the Satellite Status Page, the Navigation Page, Map
Page and the Sonar Page. They are accessed by pressing the
PAGES key,
then using → or ← to select a Page. (Clear the Pages menu by pressing
EXIT.)
Pages Menu showing Map page options.
Sonar Page
The Sonar Page displays the sonar chart, a view of the water column
from the surface to the bottom. The chart scrolls across the screen from
right to left, displaying signal echoes that represent fish, structure and
the bottom. The Sonar Page is discussed in detail in Sec. 3.
Satellite Status Page
The Satellite Status Page provides detailed information on the status
of the unit's satellite lock-on and position acquisition. To get to the Sat-
ellite Status Page: Press the
PAGES key, then use → or ← to select
STATUS. (Clear the Pages Menu by pressing EXIT.)
No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed. The Sat-
ellite Status Page shows you the quality and accuracy of the current
satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!