Filter
Top Products
73
Remote Passive Antenna command on the Satellite Status Menu.
WARNING:
As long as the External Passive Antenna command is acti-
vated, the iFINDER will only monitor GPS signals from an
external passive antenna. If you have this command acti-
vated and are not using an external passive antenna, the
unit will not be able to accurately lock on. To switch back
to using the iFINDER's internal antenna (or to use an op-
tional external active antenna), be sure to turn off this
command.
GPS Simulator
The GPS simulator lets you use the unit to simulate outdoor naviga-
tion. You can set the starting location in latitude/longitude (Starting
Position) or from a stored waypoint, map place or POI location (Start-
ing Waypoint). You can move across the map by using the arrow keys
(
STEER W/ ARROWS) or by setting the track and speed in the boxes pro-
vided on simulator screen.
To get to the GPS Simulator:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT.
2. Press ↓ to
GPS SIMULATOR|ENT.