Filter
Top Products
72
Customize Page Displays
The Digital Data, Navigation, and Map pages all have customizable
options available in Advanced Mode. The options give you control over
what information will be viewed on each page.
Customize Digital Data Page
The Digital Data page has six boxes that may be customized. While on
the Digital Data Page, press
MENU|↓ to CUSTOMIZE|ENT. A data box be-
gins to flash. Use the arrow keys to select the box you want to change.
With the desired display box highlighted and flashing, press
ENT to
open a list of data options. Use ↓ or ↑ to select a data category, then
press
ENT to open the category menu. Select the data option you want
to display and press
ENT, which will turn on (check) or turn off (un-
check) the box next to the option. You can repeat these steps to change
the display in another box. When all your changes are finished, press
EXIT|EXIT to return to the main page display.
Customize Navigation Page
While on the Navigation Page press
MENU|↓ to CUSTOMIZE|ENT. Use ↓ or
↑ to select a data category, then press
ENT to open the category menu.
Select the data option you want to display and press
ENT, which will
turn on (check) or turn off (uncheck) the box next to the data option.
Repeat these steps to change the display in another box. When all your
changes are finished, press
EXIT|EXIT to return to the main page dis-
play.
Customize Map Page
While on the Map Page press
MENU|↓ to CUSTOMIZE|ENT. Use ↓ or ↑ to
select a data category, then press
ENT to open the category menu. Se-
lect the data option you want to display and press
ENT, which will turn
on (check) or turn off (uncheck) the box next to the option. Repeat these
steps to change the display in another box. When all your changes are
finished, press
EXIT to return to the main page display
External Passive Antenna
The iFINDER H2OC can be used with an optional external antenna.
While we recommend the more powerful external active antenna, the
unit can also operate with an external passive antenna. To do this, mod-
ify the settings so the unit will look for an external passive antenna
rather than an external active antenna.
From the Satellite Status page, press
MENU|↓ to EXT PASSIVE ANT. Press
ENT to turn on (check) or turn off (uncheck) the command.