Filter
Top Products
58
Easy Mode only allows you to work with one trail. Advanced Mode lets
you save up to 10 trails in the iFINDER's memory. Since you can copy
these trails to MMCs in the form of GPS Data Files (*.usr format), the
only true limit on the number of trails you can record is the number of
MMCs you can carry in your pockets.
(For various trail options, see the Trail Options entry in Sec. 5.)
Create and Save a Trail
The iFINDER is set at the factory to automatically create and record a
trail while the unit is turned on. It will continue recording the trail un-
til the length reaches the maximum trail point setting (default is 2,000,
but the unit can record trails 9,999 points long). When the point limit is
reached, the iFINDER begins recording the trail over itself.
To preserve a trail from point A to point B, you must turn off the trail
by making it inactive before heading to point C or even back to point A.
When a trail is set inactive, the iFINDER automatically creates and
begins recording a new trail.
Clear a Trail
In Easy Mode, this command is used to erase the active trail and im-
mediately begin recording a new one. It's available only in Easy Mode.
1. Press
MENU|↓ to CLEAR TRAIL|ENT|← to YES|ENT.
Delete a Trail
This is the command that allows you to delete a trail in Advanced
Mode:
Press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail name|ENT|↓ to
DELETE TRAIL|ENT|← to YES|ENT.
Edit a Trail Name
To edit a trail name, press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail
name|
ENT|ENT. Press ↑ or ↓ to change the first character, then press
→ to the next character and repeat until the name is correct. Press
EXIT
repeatedly to return to the main page display.
Edit a Trail Color
To edit a trail color, press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail
name|
ENT. Press ↓ TO COLOR and press ENT. Use the ↑ ↓ keys to select
the desired color and press
ENT. Press EXIT repeatedly to return to the
main page display.