Filter
Top Products
170 171
Return to the Top page
Appendix
Return to the Top page
Appendix
•Requirements Pandora®:
Requirements for listening to the Pandora® are as
follows:
•A smartphone with the latest Pandora application
installed.
•A Pandora account (if you do not have an account,
create one for free using the mobile app or on www.
pandora.com).
•An active internet connection.
iPhone or iPod touch
•Apple iPhone or iPod touch with iOS 3 or later
installed
•Latest version of the Pandora application (search
App Store for Pandora and install).
•iPhone/ iPod touch connected to this unit with a
KCA-iP202.
Android™
•Latest version of the Pandora Android application
(search Google Play for Pandora and install).
•Bluetooth must be built in and the following profiles
must be supported.
–SPP (Serial Port Profile)
–A2DP (Advanced Audio Distribution Profile)
BlackBerry®
•Visit www.pandora.com from the built in browser to
download the Pandora application.
•Bluetooth must be built in and the following profiles
must be supported.
–SPP (Serial Port Profile)
–A2DP (Advanced Audio Distribution Profile)
Note
•Pandora® is available only in the U.S, Australia and
New Zealand.
•Because Pandora® is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may become
unavailable.
•Some functions of Pandora® cannot be operated
from this unit.
•For issues using the application, please contact
Pandora® at pandora-support@pandora.com
•Requirements iHeartRadio™:
Requirements for listening to iHeartRadio are as
follows:
•In the application on your device, log in and create a
free account with iHeartRadio.
•Internet connection by 3G, LTE, EDGE, or WiFi.
Note
•Because iHeartRadio™ is a third-party service,
the specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may become
unavailable.
•Some iHeartRadio™ functionality cannot be
operated from this unit.
Safety precaution
öFCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used
in accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV
technician for help.
#CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS
RULES 21 CFR SUBCHAPTER J IN EFFECT AT
DATE OF MANUFACTURE.
Location: Top plate
öIC (Industry Canada) Notice
This device complies with Industry Canada licence-
exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference, and
(2)this device must accept any interference, including
interference that may cause undesired operation of
the device.
The term “IC: ” before the certification/ registration
number only signifies that the Industry Canada
technical specification were met.
#CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
•ContainsTransmitterModule
FCC ID : RKXFC6000S
•ContainsTransmitterModule
IC: 5119A-FC6000S
About W02-5613 (USB Wi-Fi® Adapter)
The Wi-Fi Adapter is attached to this unit when shipped
from the factory. When the adapter is removed, store it
in a safe place.