Filter
Top Products
For H3T models, the top tether
anchors are located on the back
panel behind each rear seating
position. Be sure to use an anchor
located on the same side of the
vehicle as the seating position where
the child restraint will be placed.
For H3 models, the top tether
anchors are located on the back of
the rear seatbacks. Be sure to use
an anchor located on the same side
of the vehicle as the seating position
where the child restraint will be
placed.
Do not secure a child restraint in a
position without a top tether anchor if
a national or local law requires that
the top tether be attached, or if the
instructions that come with the child
restraint say that the top tether must
be attached.
According to accident statistics,
children and infants are safer when
properly restrained in a child restraint
system or infant restraint system
secured in a rear seating position.
See Where to Put the Restraint on
page 1-32 for additional information.
Securing a Child Restraint
Designed for the LATCH System
{ CAUTION
If a LATCH-type child restraint is
not attached to anchors, the child
restraint will not be able to protect
the child correctly. In a crash, the
child could be seriously injured or
killed. Install a LATCH-type child
restraint properly using the
anchors, or use the vehicle’s
safety belts to secure the
restraint, following the instructions
that came with the child restraint
and the instructions in this manual.
H3T
H3
1-36 Seats and Restraint System