Filter
Top Products
Rear Seats
60/40 Split Bench
Seat (H3)
The 60/40 split bench seats can be
folded for more cargo space.
Folding the Seatbacks
There should be nothing on, under,
or in front of the seat, and the front
seats should be moved forward.
To fold the rear seatback(s):
1. Reach under the front of the seat
and lift the cushion up while
moving it forward.
2. Pull the seat cushion forward
until it rests in the footwell.
Notice: Folding a rear seat with
the safety belts still fastened may
cause damage to the seat or the
safety belts. Always unbuckle the
safety belts and return them to
their normal stowed position
before folding a rear seat.
3. Lift the latch on top of the
seatback and pull the seatback
forward. Fold the seatback
down until it is nearly flat.
4. If the seatback will not fold nearly
flat, try moving the front seat
forward and/or moving the front
seatback more upright.
5. Repeat the steps for the other half
of the 60/40 split bench seat.
Seats and Restraint System 1-7