Filter
Top Products
To store the jack tool bag and jack:
1. Return the tools to the jack
tool bag.
2. Secure the tool bag to the jack
by securely wrapping the straps
around the jack. Then, slide
the straps through the rings on
the bag and secure.
3. Reinstall the wing nut retainer to
fasten the jack and tool bag
under the rear seat.
Make sure that the wing nut
passes through the tool bag and
the jack before tightening it.
4. Turn the wing nut retainer
clockwise to secure.
Spare Tire
The vehicle, when new, had a
fully-inflated spare tire. A spare tire
may lose air over time, so check
its inflation pressure regularly.
See Inflation - Tire Pressure on
page 5-51 and Loading the Vehicle
on page 4-35 for information
regarding proper tire inflation and
loading your vehicle. For instruction
on how to remove, install or store
a spare tire, see Removing the Flat
Tire and Installing the Spare Tire
on page 5-72 and Storing a Flat or
Spare Tire and Tools (H3) on
page 5-78 or Storing a Flat or Spare
Tire and Tools (H3T) on page 5-80.
After installing the spare tire on
your vehicle, you should stop
as soon as possible and make sure
the spare is correctly inflated.
The spare tire does not have a Tire
Pressure Monitor System sensor.
You may get a low pressure warning
light. See Tire Pressure Monitor
Operation on page 5-54. Have the
damaged or flat road tire repaired or
replaced as soon as you can.
Do not mix tires and wheels of
different sizes, because they will not
fit. Keep your spare tire and its
wheel together.
5-82 Service and Appearance Care