Filter
Top Products
Taillamps, Turn Signal,
Stoplamps and Back-up
Lamps (H3)
A. Stoplamp, Taillamp and Turn
Signal Lamp
B. Back-up Lamp
To replace one of these bulbs in the
taillamp assembly:
1. Open the swing-gate.
See Swing-gate on page 2-9.
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly away
from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Pull the old bulb to release it
from the socket.
6. Reverse Steps 1 through 4 to
reinstall.
Taillamps, Turn Signal,
Stoplamps and Back-up
Lamps (H3T)
A. Stoplamp and Taillamp
B. Turn Signal Lamp
C. Back-up Lamp
Passenger Side Shown
5-42 Service and Appearance Care