Filter
Top Products
6 (Low Speed): For steady
wiping at low speed, turn the band
away from you to the first solid
position past the delay settings.
1 (High Speed): For high-speed
wiping, turn the band to the
second solid position past the delay
settings.
9 (Off): Move the band to off, to
stop the wipers.
Be sure to clear ice and snow from
the wiper blades before using
them. If they are frozen to the
windshield, carefully loosen or thaw
them. If the blades do become
worn or damaged, get new blades
or blade inserts.
Windshield wipers work in all power
modes, except when the ignition
is set to LOCK/OFF. After the
engine is turned off, wipers will work
in Retained Accessory Power
(RAP) mode until a door is opened.
See Retained Accessory Power
(RAP) on page 2-17.
Windshield Washer
L
(Washer Fluid): This feature is
located on the paddle marked
with
L at the top of the
multifunction lever. Push the paddle
to spray washer fluid on the
windshield. The wipers will clear the
window and then either stop or
return to the preset speed.
{ CAUTION
In freezing weather, do not use
your washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.
Rear Window
Wiper/Washer
For vehicles with this feature, the
knob is located on the instrument
panel below the climate controls.
Z (Rear Wiper): Turn to 1
for a slower wiping speed or to 2 for
a faster wiping speed.
0 (Off): Turn to 0 for off.
= (Washer Fluid): Press to wash
and wipe the window.
3-8 Instrument Panel