Filter
Top Products
High Mobility Characteristics
The H3 has a 8.8 inch (22.3 cm)
running ground clearance (A),
a 9.2 inch (23.4 cm) axle to ground
clearance (B), and a low center
of gravity.
The H3T has a 9.5 inch (24.1 cm)
running ground clearance (A),
and 8.7 inch (22.1 cm) axle to
ground clearance (B), and a low
center of gravity.
The H3 has an approximate
approach angle (A) of 37.4 degrees
and a departure angle (B) of
34.7 degrees, depending on
suspension packages.
The H3T has an approximate
approach angle (A) of 37.1 degrees
and a departure angle (B) of
31 degrees, depending on
suspension packages.
Design specifications required
a minimum gradeability of 60%
(31 degrees) slope, with the vehicle
fully loaded, on high friction
surfaces with maximum vehicle
speed not to exceed 6 mph
(9.7 km/h). The vehicle is expected
to traverse this grade only for
short durations. Never stop and idle
the vehicle or park it on this grade.
4-16 Driving Your Vehicle