Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
10-3
SECTION 10 – HAZARD
AVOIDANCE
To change the viewing mode between 360
˚
and 120˚:
1) Select the Stormscope Page.
2) Press the
VIEW
Softkey. The
360
and
ARC
softkeys are displayed. Press the 360 Softkey
to display a 360˚ viewing area or press the ARC
Softkey to display a 120˚ viewing area.
3) Press the
CLEAR
Softkey to remove all
Stormscope lightning data from the display.
10.3 XM WEATHER (OPTIONAL)
WARNING: XM Weather is not intended to
be used for hazardous weather penetration.
Weather information provided by XM Radio
Service is approved only for weather avoidance,
not penetration.
1) Press the
MAP
Softkey.
2) Press the
NEXRAD or XM LTNG
Softkey to
display the desired weather. Press the
applicable softkey again to remove weather
data from the Navigation Map Page.
Figure 10-7 Navigation Map Page Displaying NEXRAD Weather
Displaying METAR and TAF information on the
Airport Information Page
To display METAR and TAF text on the
Airport Information Page:
1) Turn the
Large FMS
Knob to select the WPT Page
Group.
2) Turn the
Small FMS
Knob to select the Airport
Information Page.
3) Press the
WX Softkey to display METAR and
TAF text (METAR and TAF information is
updated every 12 minutes).
Figure 10-8 METAR and TAF Text Displayed on the
Airport (Weather) Information Page
METAR
Text
TAF
Text
WX
Softkey