Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
9-3
SECTION 9 – PROCEDURES
Figure 9-6 Selecting an Approach Procedure
5) Turn the
FMS
Knob to highlight the desired
approach. Press the
ENT
Key.
6) The cursor will move to the TRANSITIONS
field. Turn the
Large FMS
Knob to highlight the
desired transition waypoint and press the
ENT
Key. (The “Vectors” option assumes vectors will
be received to the final course segment of the
approach and will provide navigation guidance
relative to the final approach course.)
Figure 9-7 Selecting an Approach Transition
7) Turn the
Large FMS
Knob to highlight ‘Activate?’
and press the
ENT
Key to activate the approach.
Selecting ‘Load?’ will add the procedure to the
flight plan without immediately using it for
navigation guidance.
Activate An Approach in the Active Flight Plan
1) With the Navigation Map Page displayed, press
the
PROC
Key.
2) Turn the
Large FMS
Knob to highlight ‘ACTIVATE
APPROACH’.
3) Press the
ENT
Key. The approach procedure is
now active.