Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
4-4
SECTION 4 – NAV/COM &
TRANSPONDER
6) Turn the
Large FMS
Knob to select the volume
field if desired. Turn the
Small FMS
Knob to
adjust the ADF volume to the desired level.
7) Press the
FMS
Knob to exit all the fields.
DME Radio (optional)
Figure 4-8 Radio Tuning Window
To change the DME tuning source:
1) From the Tuning Window, turn the
Large FMS
Knob to highlight the DME source field.
2) Turn the
Small FMS
Knob to display the selection
window. Turn the
FMS
Knob to select the
desired mode and press the
ENT
Key.
Figure 4-9 DME Selection Window
4.6 FREQUENCY AUTO-TUNING
Auto-tuning on the PFD
Figure 4-10 Nearest Airports Window (PFD)
1) Press the
NRST
Softkey to display the Nearest
Airports Window.
2) Turn the
FMS
Knob to highlight the desired
frequency.
3) Press the
ENT
Key to place the frequency in the
standby field of the active COM.
4) Press the
Frequency Toggle
Key to place the
frequency in the active field.
NAV frequencies are entered automatically in the NAV
Window upon approach loading or approach activation.
Auto-tuning on the MFD
Auto-tuning on the MFD is done in much the same way
as on the PFD. Use the FMS Knob to select the desired
frequency on any of the information pages. Pressing the
ENT Key then loads the selected frequency in the tuning
box as a standby frequency.