Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
SECTION 11 – ABNORMAL
OPERATION
11-1
SECTION 11: ABNORMAL
OPERATION
11.1 REVERSIONARY MODE
Should a system detected failure occur in either display,
the G1000 automatically enters Reversionary Mode. In
Reversionary Mode, critical flight instrumentation is
combined with engine instrumentation on the remaining
display. Minimal navigation capability is available on the
Reversionary Mode display.
Normal PFD Display
MFD in Reversionary Mode
Normal MFD Display
Figure 11-1 G1000 Reversionary Mode: Failed PFD
Reversionary Mode can also be manually activated by
the pilot if the system fails to detect a display problem.
The Reversionary Mode is activated manually by pressing
the red DISPLAY BACKUP Button on the bottom of the
audio panel (GMA 1347). Pressing the red DISPLAY
BACKUP Button again deactivates Reversionary Mode.
NOTE: The Mooney M20M/M20R/M20TN
Airplane Flight Manual and Flight Manual
Supplement always takes precedence over the
information found in this section.