Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
SECTION 7 – NAVIGATION
7-3
7.3 AIRPORT INFORMATION
Figure 7-5 Airport Information Page
Select the Airport Information Page
1) Turn the Large
FMS
Knob to select the ‘WPT’
page group.
2) Turn the Small
FMS
Knob to select the first
rectangular page icon.
Enter a Waypoint Facility Name or City Location
1) With the Airport Information Page displayed,
press the
FMS
Knob to activate the cursor.
2) Turn the Large
FMS
Knob to select the facility
name or location (city) field.
3) Turn the Small
FMS
Knob to select the desired
first character.
4) Turn the Large
FMS
Knob to select the next
character field.
5) Repeat steps 3 and 4 until the facility name or
location is selected, then press
the ENT Key.
If there are duplicate names in the database,
a list is displayed from which to choose the
desired location.
6) To remove the flashing cursor, press the
FMS
Knob.
Access Runway Information
1) With the Airport Information Page displayed,
press the
FMS
Knob to activate the cursor.
2) Turn the Large
FMS
Knob to place the cursor
on the ‘RUNWAYS’ identifier field.
3) Turn the Small
FMS
Knob to display the next
runway for the selected airport. Continue
turning the Small
FMS
Knob to select the
desired runway.
4) To remove the flashing cursor, press the
FMS
Knob.
Access Frequency Information
1) With the Airport Information Page displayed,
press the
FMS
Knob to activate the cursor.
2) Turn the Large
FMS
Knob to move the cursor
to the Frequencies Window.
3) Turn either
FMS
Knob to scroll through the list,
placing the cursor on the desired frequency.
If a listed frequency has sector or altitude
restrictions, the frequency is preceded by an
info (‘i’) designation. Press the
ENT
Key to
view the information. The following may be
displayed with the frequency:
• ‘TX’ – transmit only
• ‘RX’ – receive only
• ‘PT’ – part time frequency
4) Press the
ENT
Key to place the selected fre-
quency in the standby field of the COM or NAV
Window.
5) To remove the cursor, press the
FMS
Knob.