Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
1-7
SECTION 1
SYSTEM OVERVIEW
BKSP
– Press to remove numbers entered one
at a time.
BACK
– Press to return to the previous level
softkeys.
IDENT
– Press to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK
– Press to return to the previous level
softkeys.
ALERTS
– Press to display the Alerts Window.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References
Window.
NRST – Press to display the Nearest Airports
Window.
ALERTS – Press to display the Alerts Window.
Figure 1-6 MFD Softkeys
BACK
DEC FUEL
SYSTEM
ENGINE
LEAN
ENGINE
MAP
DCLTR
BACK
SYSTEM
LEAN
ENGINE
ENGINE
LEAN
BACK
SYSTEM
TRAFFIC
TOPO
TERRAIN
DCLTR-2
DCLTR-3
DCLTR-1
Press the BACK softkey on this level to
return to the top softkey level
BACK
Press to return to the
top softkey level
CHKLIST
ASSIST
CYL SLCT
EXIT
EMERGCY
ENGINE
DCLTR
MAP
ENGINE
CHKLIST
CLR
DONE
The DONE softkey changes to UNDO when the checklist
item is already checked
STRMSCP
NEXRAD
XM LTNG
(optional)
(optional) (optional)
RST FUEL
INC FUEL
(optional)
Press the ENGINE or BACK softkey on any level to
return to the default page level
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available the
LEAN and SYSTEM softkeys which in turn access
the Lean Page and the System Page, respectively.
MAP – Pressing this softkey enables the following
softkeys:
TRAFFIC – Pressing this softkey displays/
removes Traffic on the Navigation Map.
TOPO – Pressing this softkey displays or
removes topographic information on the
Navigation Map.
TERRAIN – Pressing this softkey displays/
removes terrain and obstacle data on the
Navigation Map.