Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
1-8
SECTION 1
SYSTEM OVERVIEW
STRMSCP (optional) – Pressing this softkey
displays/removes Stormscope lightning
data on the Navigation Map.
NEXRAD (optional) – Pressing this softkey
displays/removes precipitation data on the
Navigation Map.
XM LTNG (optional) – Pressing this softkey
displays/removes XM Radio lightning data
on the Navigation Map.
BACK – Pressing this softkey displays the
ENGINE and MAP top level softkeys.
DCLTR (declutter) – Pressing this softkey removes
map information in three levels.
CHKLIST (checklist)(optional) – Pressing the
CHKLIST Softkey displays the Checklist Page.
1.4 MFD PAGE GROUPS
1) Turn the
Large FMS
Knob until the desired page
group is selected.
2) Turn the
Small FMS
Knob to select pages within
the group. See Figure 1-7.
Figure 1-7 Page Group Icon
Map Page Group
Waypoint Page Group
Auxiliary Page Group
Nearest Group
Selected Page
Number of Pages in Current
Group
1.5 BACKLIGHTING
To manually adjust the backlight for the
PFD and MFD:
1) Press the
MENU Key on the PFD to display the
PFD Setup Menu Window.
2) Press the Small FMS Knob to activate the cursor.
‘PFD DSPL > AUTO’ is now highlighted.
3) Turn the Small FMS Knob to display the
selection window.
4) Turn the
FMS Knob to select ‘MANUAL’, then
press the ENT Key.
5) With the intensity value now highlighted, turn
the Small FMS Knob to select the desired
backlighting.
6) Turn the Large FMS Knob to highlight ‘MFD
DSPL > AUTO’ and repeat steps 3 through 5.
Figure 1-8 PFD Setup Menu Window