Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
1-5
SECTION 1
SYSTEM OVERVIEW
PFD – Press to display the additional softkeys for
additional configurations of the PFD.
METRIC
– Press to display the current and
reference altitudes in meters, in addition
to feet. Pressing the METRIC Softkey also
changes the barometric setting to hectopascals.
DFLTS
– Press to reset default settings on the PFD.
DME
(optional) – Press to display the DME
Information Window.
BRG1 (bearing)
– Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the the appropriate information.
INSET
OFF
TOPO
TRAFFIC
TERRAIN
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
NEXRAD
Press the BACK or OFF softkey
to return to the top level
softkeys
XM LTNG
STRMSCP
BACK
ALERTS
(optional) (optional)(optional)
Figure 1-3 PFD Softkey Flow Chart – 1
PFD
Press the STD BARO or BACK softkeys
to return to the top level softkey
s
Press the DFLTS softkey to change the PFD
metric values to standard
ARC HSI
360 HSI
STD BARO
BACK
ALERTS
BRG2
BRG1
METRIC
DFLTS
DME
(optional)
Figure 1-4 PFD Softkey Flow Chart – 2
NAV1
– Displays NAV1 waypoint frequency or
identifier and DME information in the BRG1
Information Window.
GPS
– Displays GPS waypoint identifier and GPS
distance information in the BRG1 Information
Window.
ADF
– Displays ADF waypoint frequency in
the BRG1 Information Window.
OFF
– Removes the BRG1 Information
Window.
360 HSI
– Press to display the 360° compass rose.
ARC HSI
– Press to display the 140° viewable arc.