Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
1-4
SECTION 1
SYSTEM OVERVIEW
(16) ENT Key – Accepts a menu selection or data entry.
This key is used to approve an operation or complete data
entry. It is also used to confirm selections and information
entries.
(17) Dual ALT Knob – Sets the reference altitude in the
box located above the Altimeter. The large knob selects
the thousands, while the small knob selects the hundreds.
Altitude Select is used by the Automatic Flight Control
System in certain modes, in addition to the standard
G1000 Altitude Alerter function.
(18) AP Key – Engages/disengages the Autopilot and
Flight Director in the default vertical and lateral modes.
(19) FD Key – Activates/deactivates the Flight Director
only. Pressing the
FD Key turns on the Flight Director in
the default pitch axis and roll axis modes. Pressing the
FD Key again deactivates the Flight Director and removes
the command bars, unless the Autopilot is engaged. If the
Autopilot is engaged, the FD Key is disabled.
(20) NAV Key
– Selects/deselects the Navigation Mode.
(21) ALT Key – Selects/deselects the Altitude Hold
Mode.
(22) VS Key – Selects/deselects the Vertical Speed Mode.
(23) FLC Key – Selects/deselects the Flight Level Change
Mode.
(24) HDG Key – Selects/deselects the Heading Select
Mode.
(25) APR Key – Selects/deselects the Approach Mode.
(26, 27) NOSE UP/NOSE DN Keys – Controls the
active pitch reference for the Pitch Hold, Vertical Speed,
and Flight Level Change modes.
1.2 PFD SOFTKEYS
Softkey OFF
Softkey ON
OBS
TMR/REF
NRST
INSET
IDENT
XPDR
CDI
PFD
ALERTS
ADF/DME
(optional)
Figure 1-2 PFD Top Level Softkeys
INSET – Press to display the Inset Map in the lower
left corner of the PFD.
OFF
– Press to remove the Inset Map.
DCLTR
(3) – Press momentarily to select the
desired amount of map detail. The declutter
level appears adjacent to the DCLTR Softkey.
• No declutter: All map features are visible
• Declutter – 1: Declutters land data
• Declutter – 2: Declutters land and SUA data
• Declutter – 3: Removes everything except the active
flight plan
TRAFFIC
– Press to display traffic on the map.
TOPO
– Press to display topographical data (i.e.,
coastlines, terrain, rivers, lakes, etc.) and
elevation scale on the Inset Map
TERRAIN
– Press to display terrain information
on the Inset Map.
STRMSCP (optional)
– Press to display the
Stormscope lightning data on the Inset Map
(within a 200 nm radius of the aircraft).
NEXRAD (optional)
– Press to display NEXRAD
precipitation data on the Inset Map.
XM LTNG (optional)
– Press to display the XM
®
Radio lightning data on the Inset Map.
BACK
– Press to return to the previous level
softkey configuration.
ALERTS
– Press to display the Alerts Window.