Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
12-8
SECTION 12 – ANNUNCIATIONS
& ALERTS
Database Message Advisories
Alerts Window Message Comments
MFD1 DB ERR – MFD1 aviation
database error exists.
The MFD and/or PFD detected a failure in the aviation database. Attempt to reload
the aviation database. If problem persists, the G1000 system should be serviced.
PFD1 DB ERR – PFD1 aviation
database error exists.
MFD1 DB ERR – MFD1 basemap
database error exists.
The MFD and/or PFD detected a failure in the basemap database.
PFD1 DB ERR – PFD1 basemap
database error exists.
MFD1 DB ERR – MFD1 terrain
database error exists.
The MFD and/or PFD detected a failure in the terrain database. Ensure that the ter
-
rain card is properly inserted in display. Replace terrain card. If problem persists, The
G1000 system should be serviced.
PFD1 DB ERR – PFD1 terrain database
error exists.
DB MISMATCH – Aviation database
version mismatch. Xtalk is off.
The PFD and MFD have different aviation database versions installed. Crossfill is off.
Install correct aviation database version in both displays.
DB MISMATCH – Aviation database
type mismatch. Xtalk is off.
The PFD and MFD have different aviation database types installed (Americas, Euro
-
pean, etc.). Crossfill is off. Install correct aviation database type in both displays.
DB MISMATCH
– Basemap database
version mismatch. Xtalk is off.
The PFD and MFD have different basemap database versions installed. Crossfill is
off. Install correct basemap database version in both displays.
DB MISMATCH
– Terrain database
version mismatch. Xtalk is off.
The PFD and MFD have different terrain database versions installed. Crossfill is off.
Install correct terrain database version in both displays.
DB MISMATCH – Terrain database
type mismatch. Xtalk is off.
The PFD and MFD have different terrain database types installed. Crossfill is off.
Install correct terrain database type in both displays.
DB MISMATCH
– Obstacle database
version mismatch. Xtalk is off
The PFD and MFD have different obstacle database versions installed. Crossfill is off.
Install correct obstacle database version in both displays.