Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
9-2
SECTION 9 – PROCEDURES
6. A second window is displayed listing available
transitions for the arrival. Turn either
FMS
knob
to highlight the desired transition waypoint and
press the
ENT
key.
Figure 9-4 Select Arrival Transition
7. A third window is displayed listing the available
runways. Turn either
FMS
knob to select the
desired runway and press the
ENT
key.
Figure 9-5 Select Arrival Runway
8. With ‘LOAD?’ highlighted, press the
ENT
key.
If a flight plan is active, the selected arrival
procedure is inserted after the destination
airport and becomes part of the active flight
plan. If no flight plan is active when the arrival
is loaded, the arrival procedure will become the
active flight plan.
9.2 APPROACHES
Load and/or Activate an Approach Procedure
1. With the Navigation Map Page displayed, press
the
FPL
key.
2. Press the
LD APR
softkey. If a flight plan is
active, the destination airport will be displayed
as the default. A list of available approaches
is also displayed.
3. If no flight plan is active, use the
FMS
knobs to
enter the identifier of the desired airport. Press
the
ENT
key.
4. Turn the
large FMS
knob to highlight the
Approach field. Turn the
small FMS
knob to
display a list of available approaches.
Figure 9-6 Selecting an Approach Procedure
5. Turn the
FMS
knobs to highlight the desired
approach. Press the
ENT
key.
6. The cursor will move to the TRANSITIONS
field. Turn the
large FMS
knob to highlight the
desired transition waypoint and press the
ENT
key. (The “Vectors” option assumes vectors will
be received to the final course segment of the
approach and will provide navigation guidance
relative to the final approach course.)