Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
SECTION 7 – NAVIGATION
7-2
4. Continue turning the
small FMS
knob to scroll
through the list and highlight the desired
waypoint or airport.
5. Press the
ENT
key to confirm the selection.
Press
ENT
again to activate a Direct-to.
To re-center the CDI (HSI) needle to the
same destination waypoint:
1. Press the Direct-to
( )
key, followed by
pressing the
ENT
key twice. NOTE: If a missed
approach point (MAP) is the current destina-
tion, the approach will be canceled.
To manually define the Direct-to course:
1. Press the
Direct-to
( )
key.
2. Turn the
FMS
knobs to select the destination
waypoint.
3. Press the
ENT
key to confirm the selected way-
point, then turn the
large FMS
knob to highlight
the Direct-to Course field.
4. Turn the
FMS
knobs to select the desired course
and press the
ENT
key.
5. Press the
ENT
key again to begin navigation
using the selected destination and course.
Canceling Direct-to Navigation:
1. Press the
Direct-to
( )
key.
2. Press the
MENU
key to display the Direct-to
options menu.
3. With ‘Cancel Direct-To NAV’ highlighted, press
the
ENT
key. If a flight plan is still active, the
G1000 resumes navigating the flight plan
along the closest leg.
Figure 7-3 Canceling Direct-to Navigation
Direct-to Navigation from the PFD
Figure 7-4 PFD Direct-to Window
WPT Symbol
Identifier
Facility Name
WPT Location
Nearest WPT
Bearing to WPT
Distance from WPT
Lat/Lon
Course to Selected WPT
Flight Plan WPT
1. Press the Direct-to key
( )
.
2. Turn the
large FMS
knob to place the cursor in
the desired selection field.
3. Turn the
small FMS
knob to begin selecting the
desired identifier, location, etc.
4. Press the
ENT
key.
5. The cursor is now flashing on ‘ACTIVATE?’.
Press the
ENT
key again to activate.
Cancelling Direct-to Navigation:
1. Press the Direct-to
( )
key.
2. Press the
MENU
key to display the Options
Window. The cursor will be flashing on ‘Cancel
Direct-to NAV’.
3. Press the
ENT
key to cancel the direct-to.