Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
SECTION 11 – ABNORMAL
OPERATION
11-1
SECTION 11: ABNORMAL
OPERATION
11.1 REVERSIONARY MODE
Should a system detected failure occur in either dis-
play, the G1000 automatically enters reversionary mode.
In reversionary mode, critical flight instrumentation is
combined with engine instrumentation on the remaining
display. Minimal navigation capability is available on the
reversionary mode display.
Normal PFD Display
MFD in Reversionary Mode
Normal MFD Display
Figure 11-1 G1000 Reversionary Mode: Failed PFD
Reversionary display mode can also be manually ac-
tivated by the pilot if the system fails to detect a display
problem. The reversionary mode is activated manually
by pressing the red DISPLAY BACKUP button on the
bottom of the audio panel (GMA 1347). Pressing the red
DISPLAY BACKUP button again deactivates reversion-
ary mode.
NOTE: The Mooney M20M/M20R Airplane Flight
Manual and Flight Manual Supplement always
takes precedence over the information found in
this section.