Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
4-4
SECTION 4 – NAV/COM &
TRANSPONDER
DME Radio (optional)
Figure 4-8 Radio Tuning Window
To change the DME tuning source:
1. From the Tuning window, turn the
large FMS
knob to highlight the DME source field.
2. Turn the
small FMS
knob to display the selec-
tion window. Turn the
FMS
knob to select the
desired mode and press the
ENT
key.
Figure 4-9 DME Selection Window
4.6 FREQUENCY AUTO-TUNING
Auto-tuning on the PFD
Figure 4-10 Nearest Airports Window (PFD)
1. Press the
NRST
softkey to display the Nearest
Airports Window.
2. Turn the
FMS
knobs to highlight the desired
frequency.
3. Press the
ENT
key to place the frequency in the
standby field of the active COM.
4. Press the
Frequency Toggle
key to place the
frequency in the active field.
NAV frequencies are entered automatically in the NAV
window upon approach loading or approach activation.
Auto-tuning on the MFD
Auto-tuning on the MFD is done in much the same
way as on the PFD. Use the FMS knobs to select the de-
sired frequency on any of the information pages. Pressing
the ENT key then loads the selected frequency into the
standby frequency window of the appropriate radio.