Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
10-3
SECTION 10 – HAZARD
AVOIDANCE
2. Press the
VIEW
softkey. The
360
and
ARC
soft-
keys are displayed. Press the 360 softkey to
display a 360˚ viewing are or press the ARC
softkey to display a 120˚ viewing area.
Press the
CLEAR
softkey to remove all Storm-
scope lightning data from the display.
10.3 XM WEATHER (OPTIONAL)
WARNING: Use of XM weather for hazard-
ous weather penetration is not recommended.
Weather information provided by XM Radio
Service is approved only for weather avoidance,
not penetration.
1. Press the
MAP
softkey.
2. Press the
NEXRAD or XM LTNG
softkey to dis-
play the desired weather. Press the applicable
softkey again to remove weather data from the
Navigation Map Page.
Figure 10-7 Navigation Map Page Displaying NEXRAD Weather
Displaying METAR and TAF information on the
Airport Information Page
To display METAR and TAF text on the Air-
port Information Page:
1. Turn the
large FMS
knob to select the WPT Page
Group.
2. Turn the
small FMS
knob to select the Airport
Information Page.
3. Press the WX softkey to display METAR and TAF
text (METAR and TAF information is updated
every 12 minutes).
Figure 10-8 METAR and TAF Text Displayed on the
Airport (Weather) Information Page
METAR
Text
TAF
Text
WX
Softkey