Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
SECTION 7 – NAVIGATION
7-6
Access Runway Information for the
Selected Airport
1. Press the
RNWY
softkey located at the bottom
of the display.
2. Turn the
small FMS
knob to select the desired
runway.
Quickly Tune the COM Transceiver to a
Nearby Airport Frequency
1. Press the
FREQ
softkey located at the bottom
of the display.
2. Turn either
FMS
knob to select the desired
frequency.
3. Press the
ENT
key. The selected frequency is
placed in the standby frequency tuning box.
4. Press the
Frequency Toggle
key to place the
frequency in the active field.
Nearest Airports Information on the PFD
Primary COM Frequency
Identifier
Airport Symbol
Bearing TO
Distance
Runway Length
Figure 7-10 Nearest Airports Window
1. Press the
NRST
softkey to display the PFD Near-
est Airports Window.
View Information on a Specific Airport in
the List
1. Turn the
large FMS
knob to place the cursor on
the desired airport identifier.
2. Press the
ENT
key to display airport informa-
tion.
3. Press the
ENT
key again (cursor is on ‘BACK’)
to return to the list.
Load an Airport COM Frequency into the
Active COM
1. Turn the
large FMS
knob to place the cursor
on the desired airport frequency shown in the
window.
2. Press the
ENT
key and the selected frequency
will become the standby frequency for the
active COM.
3. Press the
Frequency Toggle
key to make the
frequency the active frequency.
7.9 NEAREST INTERSECTIONS
Figure 7-11 Nearest Intersections Page
Select the Nearest Intersections Page
1. Turn the
large FMS
knob to select the NRST
page group.