Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
9-1
SECTION 9 – PROCEDURES
SECTION 9: PROCEDURES
9.1 ARRIVALS AND DEPARTURES
Load and Activate a Departure Procedure
1. With the Navigation Map Page displayed, press
the
FPL
key.
2. Press the
LD DP
softkey. If a flight plan is active,
the departure airport will be displayed as the
default. A list of available departures is also
displayed.
3. If no flight plan is active, use the
FMS
knobs to
enter the identifier of the desired airport. Press
the
ENT
key.
4. Turn the
large FMS
knob to highlight the Depar-
ture field. Turn the
small FMS
knob to display
a list of available departures.
5. Turn either
FMS
knob to select the desired
departure and press the
ENT
key.
Figure 9-1 Select Departure
6. A list of runways may be displayed for the
departure. Turn either
FMS
knob to select the
desired runway and press the
ENT
key.
7. A list of available transitions is displayed for the
departure. Turn either
FMS
knob to highlight
the desired transition waypoint and press the
ENT
key.
Figure 9-2 Select Departure Transition
8. With ‘LOAD?’ highlighted, press the
ENT
key.
The departure will be active when the flight
plan is active.
Load and Activate An Arrival Procedure
1. With the Navigation Map Page displayed, press
the
FPL
key.
2. Press the
LD STAR
softkey. If a flight plan is
active, the destination airport will be displayed
as the default. A list of available arrivals is also
displayed.
3. If no flight plan is active, use the
FMS
knobs to
enter the identifier of the desired airport. Press
the
ENT
key.
4. Turn the
large FMS
knob to highlight the Arrival
field. Turn the
small FMS
knob to display a list
of available arrivals.
5. Turn either
FMS
knob to select the desired
arrival and press the
ENT
key.
Figure 9-3 Select Arrival