Garmin 3210 GPS Receiver User Manual


 
GPSMAP 3206/3210 Owner’s Manual 91
usIng radar > radar Page
radar
Radar Page
With the radar properly installed, when you turn on your GPSMAP 3206/3210, it
should detect the radar as a new network connection.
NOTE: A software update may be needed for the radar to function properly.
If the message “Incompatible Software Version” appears when you turn on the
GPSMAP 3206/3210, you must update your GPSMAP 3206/3210 software. A
software update card is provided with the radar.
When the new radar is detected, the Radar Page is added to the page sequence.
If the Radar Page is not available, press and hold ADJ/MENU to open the Main
Menu. Highlight the System tab, and select Radar from the Services list at the
bottom of the page.
To view the Radar Page:
PressPAGErepeatedlyuntiltheRadarPageappears.
Radar Page
Conguring the Radar Page
You can customize the appearance of the Radar Page. See “Configuring Main Pages”
on page 33 for more information.
To add or remove functions on the Radar Page:
1. OpentheRadarPage,andthenpressandholdtheDATA/CNFGkeyto
opentheCongurationwindow.
2. UsingtheROCKER,highlightthefunctionyouwanttoaddorremove,and
pressENTER.Onlyfunctionswithacheckmarkinthecheckboxnextto
themappearontheRadarPage.