Filter
Top Products
44 GPSMAP 3206/3210 Owner’s Manual
MaIn Pages > vIdeo Page
MaIn
paGes
Video Page
The Video Page is available only if you attach an optional NTSC (National
Television System Committee) or PAL (Phase Alternate Line) composite video
source to the GPSMAP 3206/3210 (see the GPSMAP 3206/3210 & GPS 17
Installation Instructions for more information). You can input up to two different
video signals to the GSPMAP 3206/3210. When attached, you can change or
alternate between video sources, adjust the aspect, brightness, saturation, and
contrast. You can also adjust which video standard is being input.
Video Page Options
Use the ADJ/MENU key and soft keys to access the following options: Source,
Aspect, Brightness, Saturation, Contrast, and Standard.
Source—select input between Video In 1 and Video In 2. Choose
Alternate to switch between sources at 5, 10, and 30 second intervals.
Aspect—select Stretch to stretch the video input to ll the entire frame, or
select Standard to show the normal view of the video input.
Brightness—affects how bright the overall video input appears on the
display (0%–100%).
Saturation—adjusts the intensity of the colors. High saturation produces
bright colors, whereas low saturation produces washed out colors.
Contrast—adjusts the difference between light and dark areas of the video
input. The higher the contrast, the brighter the video appears.
Standard (ADJ/MENU key only)—selects the composite video input
standard. Choose Auto to have the unit automatically select the Standard.
Choose NTSC for composite video in NTSC standard or PAL for
composite video input in PAL standard. If set to Auto and Alternate is
selected as the Source, you might notice a switching display as the unit
determines the video input. For best results, set to the specic Standard.
•
•
•
•
•
•