Garmin 3210 GPS Receiver User Manual


  Open as PDF
of 130
 
14 GPSMAP 3206/3210 Owner’s Manual
basIc oPeratIon > creatIng and usIng waYPoInts
basIc
operatIon
Creating and Using Waypoints
The GPSMAP 3206/3210 stores up to 4,000 alphanumeric waypoints, each with a
user-dened icon, comment, depth, and water temperature.
NOTE: If you are using an optional GSD 20, GSD 21, or GSD 22, the Depth
and Water Temp elds ll in automatically.
You can create waypoints using three basic methods:
ENTER/MARK—use the ENTER/MARK key to quickly mark your
current location.
Graphically
—use the map display to dene a new waypoint.
Manually—enter new waypoint coordinates manually.
Creating Waypoints Using the ENTER/MARK Key
Use the ENTER/MARK key to capture your current location (or pointer or map
item location) to create a new waypoint. You must have a valid position x to
mark your current location.
To mark your current location:
1. PressandholdENTER/MARKuntiltheReviewWaypointPageappears.
TheGPSMAP3206/3210capturesitscurrentlocationandcreatesa
defaultnameandsymbolforthenewwaypoint.
2. Toacceptthewaypointwiththedefaultnameandsymbol,pressENTER.
Tochangeanyoftheavailablewaypointinformation,seepagecf.
•
•
•
Review Waypoint Page
Creating Waypoints Using the Map
You can create a waypoint by using the map pointer to point to any map
location or map feature. When you move the pointer over a map item, you see a
highlighted description of the item.
To create a new waypoint from a map location:
1. UsetheROCKERtomovethepointertothemaplocationyouwant.
2. PressandquicklyreleaseENTER/MARKtocapturethepointerlocation.
Donotholdthebuttondown;doingsomarksyourcurrentlocation,notthe
maplocation.TheReviewWaypointPageappears.
3. Toacceptthewaypointwiththedefaultinformation,pressENTER.
OR
Tochangeanywaypointinformation,highlighttheappropriateeldand
pressENTER.Afterenteringyourchanges,presstheOKsoftkey.
 previous next