Garmin 3210 GPS Receiver User Manual


  Open as PDF
of 130
 
20 GPSMAP 3206/3210 Owner’s Manual
basIc oPeratIon > revIewIng and edItIng waYPoInts
basIc
operatIon
Proximity Waypoints
Use the Proximity sub tab to dene an alarm circle around a stored waypoint. The
alarm circle can help you avoid reefs, rocks, or restricted waters. You can add
proximity alarms to a maximum of 10 waypoints or on-screen map items, with a
maximum alarm radius of 99.99 nautical or statute miles, or kilometers.
If a proximity alarm circle overlaps an existing alarm circle, the message
“Proximity Overlaps Another Proximity Waypoint” appears. Because the unit
only alerts for one of the overlap points, use caution when navigating in these
areas. If you enter a red proximity circle overlap, you are alerted only to the
closest proximity waypoint.
Proximity circle Proximity waypoint
To add a proximity waypoint:
1. PresstheNew AlarmsoftkeyontheProximitysubtab.TheFindFrom
CurrentPositionPageappears.
2. Highlightacategory,andpressENTER.
3. UsetheROCKERtohighlightawaypointormapitemfromthelist,and
pressENTER.TheReviewPageappearsfortheselectedwaypointormap
itemwithinaredcircle.
4. PresstheOKsoftkey.TheProximitysubtabappearswiththeDistance
eldhighlighted.
5. PressENTERandusetheROCKERtoenteraproximityradius(upto
99.99units).
6. PressENTERwhennished.
To turn proximity alarms on or off:
1. UsetheROCKERtohighlighttheeldbelowProximity Alarm onthe
Proximitysubtab,andpressENTER.
2. SelectONorOFF,andpressENTER.
To clear one or all proximity waypoints from the list:
1. UsetheROCKERtohighlighttheproximitywaypointyouwanttoclear.
2. Toclearasinglealarm,presstheDelete,softkey.
OR
Toclearallproximitywaypoints,presstheDelete Allsoftkey.A
conrmationmessageappears.
3. PresstheOKsoftkeytodeletetheproximitywaypoint.Otherwise,press
theCancelsoftkey,orpressQUITtocancel.
 previous next