Garmin 3210 GPS Receiver User Manual


  Open as PDF
of 130
 
22 GPSMAP 3206/3210 Owner’s Manual
basIc oPeratIon > navIgatIng to a destInatIon
basIc
operatIon
To Go To a new map point (non-map item) from the map display:
1. UsetheROCKERtomovethepointertothelocationyouwant,andpress
NAV.
2. WithGo To MAP Pointhighlighted,pressENTER.
To stop navigation:
1. PressNAV.
2. HighlightStop Navigation,andpressENTER.
Follow Track and TracBack Navigation
A track is an electronic breadcrumb trail recording or history of your path. The
track currently being recorded is the “active” track. An active track can be stored
or saved in the unit. Both the Follow Track and TracBack options navigate in
the same way. Follow Track uses stored or “saved” tracks; TracBack uses your
current or “active” track.
TracBack allows you to retrace your path using the track log stored in the
receiver’s memory, which eliminates the need to store waypoints along the way.
TracBack routes are created by reducing your track log into a route and activating
an inverted route. When active, a TracBack route leads you through your stored
track log points, so it is a good idea to clear the existing track log before you start
your current trip.
To clear the track log:
1. PressandholdADJ/MENUtoopentheMainMenu.
2. UsingtheROCKER,highlighttheTracks tab,andthenhighlighttheActive
subtab.
3. Pressthe
Clear softkey.Aconrmationmessageappears.
4. PresstheOK softkey toclearthetracklog.
Clear soft key
 previous next