Filter
Top Products
Quest Owner’s Manual 47
APPENDIX > ADDING MAPS TO YOUR QUEST
Adding Maps to Your Quest
You can purchase additional MapSource
®
maps from Garmin for
your Quest. Information from these maps appear on the Quest’s
Map page just like the current detail maps you transferred from
your computer when you originally set up your Quest.
The maps that were loaded in the Quest 2 when you purchased
it are protected and cannot be erased. For example, if you add
additional maps to your Quest 2, you will not overwrite the
original maps. Any additional maps you load to the Quest 2 are not
protected. These additional maps will be overwritten each time you
load new maps to the Quest 2.
Purchasing Additional MapSource Maps
In order to unlock additional maps, you need your Unit ID number
(see page 41) and serial number (see page 50).
NOTE: When you transfer additional maps to your Quest, the
existing maps you previously downloaded are automatically
deleted. Therefore, you must transfer them again at the same
time through the MapSource software that is on your computer.
See the MapSource Owner’s Manual for more information.
Controlling Map Views on the Map Page
You can view a list of your map families on the MapSource Info
page. Map families includes the maps you added from your City
Select
®
software and maps from additional mapping software you
have recently purchased.
To view the installed maps:
1. Press the MENU key, highlight Settings, and press OK.
2. Highlight Map Info and press OK. The MapSource Info
page opens.
Map families loaded in your Quest Individual maps loaded
The MapSource Info page lists the MapSource maps that are
loaded onto the unit. For example, North American City Select v6
and European City Select v6 might be listed. These are actually
map families: each map family may contain numerous smaller
maps.