Filter
Top Products
24 Quest Owner’s Manual
BASIC OPERATION > PLANNING AND MODIFYING ROUTES
Recalculating a Route
The Quest automatically recalculates your route if you stray from
the current route. You can also prompt the Quest to recalculate your
route. For example, if you change your route preference (page 38),
you can recalculate your route based on your new preference.
To
recalculate your route:
1. Press MENU, highlight Route Options, and press OK.
2. Highlight Recalculate and press OK.
Adding a Detour
When you are navigating a route, you might need to take a detour
to avoid a roadblock or construction. After you select a detour
distance, your Quest calculates a new route and provides you with
new driving instructions. The detour is saved until you stop the
current navigation or until you turn off the unit.
To set a detour:
1. Press MENU, highlight Route Options, and
press OK.
2. Highlight Detour and press OK.
3. Highlight a detour distance and press OK.
Your Quest makes every possible attempt to get you back on the
original route at your requested distance; however, the distance
may be longer if no other roads can take you back to your original
route. Sometimes, the route you are currently taking might be the
only reasonable option. If so, you will not be able to take a detour.
Adding Via Points
Via points are extra stops you make on the way to your final
destination. You can add stops to the route you are currently
navigating, to the route you are planning, or to a route that you
have previously saved.
To add via points to a saved route:
1. Press MENU, highlight Route Options, and press OK.
2. Highlight Route Planner and press OK.
3. Highlight the route to add the extra stops to and press OK.
4. Highlight <Select to add via point> and press OK.
5. Highlight a method to find the location and press OK.
6. Highlight the location of the point. Continue until all points
are added to the route.