Filter
Top Products
Quest Owner’s Manual 23
BASIC OPERATION > PLANNING AND MODIFYING ROUTES
Saving a Route
You Quest automatically saves a route created with the Route
Planner. Also, you can save an active route during navigation or
after you have reached the destination.
To save an active route:
1. Press MENU, highlight Route Options, and press OK.
2. Highlight Save Route and press OK. Press OK again at the
verification window.
Your Quest can hold up to 50 saved routes. If you have saved
routes prior to taking a trip, you only need to retrieve the
appropriate route and activate it as you prepare to leave.
The vehicle icon indicates
the route is active.
To select a saved route:
1. Press MENU, highlight Route Options, and press OK.
2. Highlight Route Planner and press OK. A list of your saved
routes appears.
3. Highlight the name of the route and press
OK. An
information page for your selected route appears.
4. To activate the route, highlight Navigate and press OK.
5. If you want to change the route by adding via points, use the
Rocker pad to highlight the Via Points box and press OK.
See “Adding Via Points” in this section for more information.
Deleting a Saved Route
You can delete a single route or all of the saved routes that exist in
your Quest.
To delete a route:
1. Press MENU, highlight Route Options, and press OK.
2. Highlight Route Planner and press OK. A list of your saved
routes appears.
3. To delete one route, highlight the name of the route. Use the
Rocker pad to highlight the red to the right of the route
name and press OK. Highlight Yes when the verification
window appears and press OK.
To delete all saved routes, press the MENU key. Highlight
Delete All and press OK. Highlight Yes when the
verification window appears and press OK.