Filter
Top Products
30 Quest Owner’s Manual
USING THE MAIN PAGES > MAP PAGE
Viewing the Map Orientation
You can orient the map in one of two ways. North Up shows the
Map page with North always at the top, as if you were reading a
paper map. Track Up allows the map to automatically rotate so
your direction of travel always appears at the top of the Map page.
If you are using Track up, a white N indicator, in the top left corner
of the Map page, points to the North.
Your Quest is set to show the Map page in Track Up orientation
until you zoom out to the 200-mile zoom range or above. To
change the map orientation settings, see page 34.
North Up
Track Up
Data Fields
The Map page displays data fields on the right-hand column of the
page. Information in these fields changes depending on whether
you are navigating a route or just traveling with the Quest turned
on. Data fields also appear on the Trip Information page (page
33) and the Compass page (page 21). For a complete list and
description of data field options, see page 45.
To change the data fields on the Map page:
1. Open the Map page and press the MENU key.
2. Highlight Edit Fields and press OK.
3. Use the Rocker pad to highlight the data field you want to
change and press OK.
4. Highlight the new data field type in the list and press OK.
5. When you are finished changing the data fields, press Page
to exit.
Data fields