3. PLOTTER OPERATION
3-60
3.12 Resetting Trip Distance
Trip distance is shown on the navigation data display. You can reset the trip
distance to zero as follows:
1. Press the [MENU] key.
2. Press the SYSTEM CONFIGURATION and GENERAL SETUP soft keys in
that order to show the GENERAL SETUP menu.
GENERAL
SETUP1
EDIT
NEXT
PAGE
RETURN
▲
KEY BEEP ON
LANGUAGE ENGLISH
RANGE UNIT nm, kt
TEMPERATURE UNIT
°
F
DEPTH UNIT ft
TEMPERATURE SOURCE NMEA
DEPTH SOURCE NMEA
RESET TRIP LOG NO
General setup menu, page 1
3. Use the trackball to select RESET TRIP LOG, then press the EDIT soft key.
4. Use the trackball to select YES, then press the ENTER soft key.
5. Press the [MENU] key to close the menu.