DeLorme PN-20 GPS Receiver User Manual


  Open as PDF
of 98
 
4
Find
The Find button is labeled with a magnifying glass. Use it to search for a point of interest, waypoint,
address, coordinate, and more. You can search for a location based on its name or its proximity to
the current map center.
Mark Waypoint
The Mark button is labeled with a push pin. Use it to mark a waypoint at your current GPS location
or the cursor location (when panning). Once you mark a location, you can edit the waypoint name,
coordinates, elevation, and provide comments about the waypoint; view the waypoint on the map;
navigate to the waypoint; average the waypoint for greater accuracy; save the waypoint; or delete
the waypoint.
Arrow Keypad
You can use the arrow keypad to:
• Movethemapcursorleft,right,up,ordown.
• Panthemapbymovingthecursorontheedgeofthemap.
• Highlightoptionsinmenusorlists.Pressdowntomovetothenextentry,pressupfromtherst
entry to go to the last entry, or down from the last entry to go to the first entry. Press and hold
to quickly scroll through a menu or list.
• Highlightcharactersinthekeyboardscreen.
Enter
You can use the ENTER button to:
• Selectamenuentryoron-screenbutton/eld.
• Getinformationaboutapointonthemap.Hoveryourcursoroverthemaplocationandpressthe
ENTER button to view detailed information, if available.
Quit
The function of the QUIT button varies depending on the current status of the Earthmate GPS PN-20.
You can use the QUIT button to cancel actions, such as panning, keyboard entry, to delete individual
points when measuring distance, and so on. If you are performing an action, pressing the QUIT but-
ton moves you backward through the page sequence.
 previous next