Filter
Top Products
26
mate GPS PN-20.
Information Field Option Description
Bearing The direction of travel from the current location to the desti-
nation (finish or next stop). Expressed in degrees.
Displays a green arrow pointing in the direction of the next
waypoint or route point. The arrow is grayed out when no
movement is reported by the device. It is green when the
device is moving.
Coordinates: Primary The coordinates for the current GPS location, cursor position,
or map center in the primary format. The default is Lat/
Lon. You can change the format in Device Setup>
Units>Coordinates: Primary.
Coordinates: Secondary The coordinates for the current GPS location, cursor position,
or map center in the secondary format. The default is
UTM/UPS. You can change the format in Device Setup>
Units>Coordinates: Secondary.
Course The direction of travel on a route from the starting location to
the destination (finish or next stop). Expressed in degrees.
Device Odometer The total distance traveled in all trips.
Distance to Finish The distance from the current location to the route finish.
Distance to Next Stop The distance from the current location to the next stop in the route.
Distance to Next Turn The distance from the current location to the next turn in the route.
Elevation The altitude (height) above or below sea level. Expressed in
distance.
Elevation: Maximum The maximum elevation achieved. Expressed in distance.
This field may be reset when you clear Trip Info.
Elevation: Minimum The minimum elevation achieved. Expressed in distance.
This field may be reset when you clear Trip Info.