DeLorme PN-20 GPS Receiver User Manual


  Open as PDF
of 98
 
25
ChangeInfoFieldsmenuoption
To Change the Information Fields
You can customize the information fields to display the information that is most important to you.
You may want to change the information that displays based on the type of activity you are doing.
Note: The information fields change when navigating.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Info Fields.
3. Press ENTER. The Info Fields Setup screen displays.
4. Use the arrow keypad to highlight Change Info Fields.
Note: If Show Info Fields displays, the information fields are hidden. Press ENTER to display
the information fields and repeat steps 2 and 3.
5. Press ENTER.
6. Use the arrow keypad to highlight the information field you want to change.
7. Press ENTER. The available information field options display.
8. Use the arrow keypad to select the information field.
9. Press ENTER.
10. Press QUIT to exit Change Info mode.
The available information fields include:
Information Field Option Description
Back on Course The direction of travel needed to return to the route while
continuing in the direction of the destination. Expressed in
degrees.
Battery Life The percentage of battery power that remains for the Earth-
The Map Page
Notes:
•The information elds you
select may be abbreviated
onthescreen.Forexample,
VelocityMadeGooddisplays
asVMG.
•Wheninformationisnotavail-
able(for example, the Dis-
tance to Finish information
eldisonlypertinentwhen
navigating),dashes(--)dis-
playintheapplicableeld.
Note: Theprimarycoordinates
are shown whenever coordi-
natesaredisplayed(forexam-
ple,whenpanning).
 previous next